(1) Before installation, it is necessary to inspect the cylinder seals, mainly to see whether the surface quality is up to standard, whether there are defects such as flying edges, burrs, cracks, pores and cutting edges. In addition, we should pay attention to whether the geometric size and accuracy meet the relevant standard requirements.
(2) For the installation of cylinder seals, some special installation tools should be used, and there should be no sundries and sharp corners on the tools, so as to avoid scratching the seals and seriously affect the sealing quality and effect.
(3) If necessary, lubricate the surface of the seal with some lubricating oil, which is conducive to the installation, but it should be noted that the amount should not be too large, otherwise it may have a negative effect, or create new problems.
(4) For the installation speed, the main requirement can not be too fast, but also can not be too slow, because this will damage the cylinder seals.